After a long period of use or some malfunction, your hydraulic pump may be in dire need of replacement. And you may now need to know exactly how much it will cost to replace a hydraulic pump, a figure that can vary due to a number of factors, which I will detail for you in this article.
1. Verify if Your Product is Eligible for Warranty
Firstly, you are better to make sure that your product is under the warranty. Most dealers and repair stores will offer an one or two years warranty on hydraulic pumps. You can contact them before replacing your hydraulic pump and if the pump qualifies for the warranty, you can have it repaired instead of replacing it, moreover it won’t cost you any extra money.
2. Whether to Replace the Parts or the Whole Hydraulic Pump
The different replacement methods also determine your replacement cost,too. If you just need to replace a few parts of the pump, this usually will be not expensive, while if the whole thing needs to be replaced, your budget may need to be a bit higher. This is usually determined by the age of the machine and the level of the damages it have.
2.1. Circumstances Requiring Replacement Parts
If your unit is newer and less broken, I would recommend replacing one of the parts on it rather than the whole pump. After all, it’s a waste to replace a recently used machine. And generally speaking, replacing just the part will cost you less. Of course, this will vary depending on the different parts of the machine, so I’ll give you an idea of what your budget might be, depending on the situation.
- The Costs of Replacing Different Parts
In general circumstance, a new cylinder block costs between $100 and $700, gaskets and o-rings between $5 and $10, and individual bearings between $8. Combine this with the cost of labor, and next you can decide how much you need to budget for replacement of the parts, which is based on the actual problem and the specific number of parts, costing a lot less than replacing the whole unit.
2.2. Situations requiring total replacement
- Machines Are UsedFor a Long Time
If your machine has been used for a long time or over 10000h to 15000h, it is better to look for the right parts than to do a whole replacement, considering the upcoming expiration of its useful life. This is also the smarter thing to do.
Moreover, after a long term use, it is likely that the manufacturer might have stopped producing this model of your hydraulic pump. Then, the best way to solve the problem is to buy a new pump.
This is because they are usually cheaper than buying the original replacement parts outright. It is also difficult to get a suitable part for an obsolete model, and even if you get the suitable one, you may also need to wait it for a long time, thus buying a new one is a more efficient choice.
- Excessive Cost of Replacement Parts
Of course, you also need to determine whether the cost of replacing the parts is more than the budget, generally speaking, if the machine are badly damaged and the parts replacement needs to spend more than 50% of the price of a pump, then you might as well go ahead and just get a brand new hydraulic pump, at least there is a longer service life.
3. The Factors that may Determine the Price of the Whole Replacement
If you need to replace the whole unit of the hydraulic pump, the factors that may affect the costs will be various. In a common situation, a hydraulic pump replacement will cost between $1500 to $4000, including the price of the equipment and the labor. Factors that influence this price generally come from the manufacturer, size, and complexity of the replacement and so on.
3.1. The Manufacturers
In order to strike a balance between price and quality, you can compare and research the prices of different suppliers and try to choose those that can offer a product guarantee and have a good reputation among their customers. In addition, some professional advice will also help, and you can consult a hydraulic engineer to find out how to choose the ideal replacement pump.
In contrast, high-end brands of hydraulic pumps usually result in better replacement costs. Replacement costs will also be higher.
3.2. The Size of the equipment you need to replace
If the unit you are replacing is a small pump with a simple design, the replacement cost could be as high as about five hundred dollars. However, if the unit is large and complex, the replacement cost could be even higher.
3.3. Different materials
You can consider your budget based on the material used for the hydraulic pump, which is also usually determined by the quality and performance of the material. Hydraulic pumps made of stainless steel and special alloys will generally speaking be more expensive than those made of iron or aluminum because of their better quality and durability.
3.4. How does it costs when thinking of the Replacement of Different Types
The types of hydraulic pumps can be categorized into gear pumps, vane pumps, and piston pumps, and depending on the type, their replacement cost will be different.
It seems that the piston pumps works better when compared to the other types, and therefore they have a higher cost ranging from about $500 to $5,000. The other two will be cheaper, and in contrast, gear pumps are the more economical choice, with a price range of roughly $100 to $2,000 role, but will require more maintenance in daily use. Vane pumps typically cost between $200 and $3,000. compared to gear pumps, they will be quieter and more efficient, but not as powerful as piston pumps.
3.5. How do the Costs of Labor
In most cases, a professional hydraulic pump replacement will cost around $1,500, which includes labor as well as the cost of the pump parts. Of course, this price depends on whether you purchase directly from the manufacturer or seek out a third party for another professional.
Conclusion
After reading this article, I’m sure you have an overall idea about the budget needed to replace a hydraulic pump, and I hope this will help you make a more proper judgment.
