Professional Manufacturer of Hydraulic Power Pack for Medical Equipment in China
Target’s hydraulic power pack is specifically designed to provide stable hydraulic power for medical equipment such as operating tables, hospital beds, examination chairs, and rehabilitation facilities, supporting lifting, tilting, and positioning adjustments.
For medical equipment hydraulic power units, our factory strictly implements the ISO 13485 medical quality management system. Target’s hydraulic power pack for medical equipment can be manufactured as an IEC 60601-certified component. Each unit undergoes functional, pressure, leakage, and electrical safety testing before leaving the factory.
We can customize voltage, flow rate, pressure, and manifold configurations to meet different medical equipment requirements with consistent hydraulic performance. Let’s create a customized hydraulic solution for your medical equipment.
Medical Hydraulic Power Packs by Drive Type
Suitable for fixed installation medical equipment, it can be directly connected to the AC power supply for operation.
Specially designed for battery powered medical equipment to meet the needs of frequent lifting and positioning movements.
Suitable for medical equipment with higher loads and longer operating times, maintaining continuous and stable hydraulic output.
Corrosion-Resistant Housing for Frequent Disinfection
Medical equipment requires frequent cleaning with disinfectants. Our hydraulic power pack for medical equipment adopts a steel housing combined with electrostatic powder coating, which helps resist corrosion, scratches, and wear caused by daily cleaning. This can reduce maintenance due to shell wear and tear, helping your medical equipment maintain a good appearance for a long time.
Our hydraulic power pack provides power for the lifting, tilting, and position adjustment of the operating table during surgery. Low noise operation and smooth motion control help reduce interference and enable medical staff to focus more on surgical procedures.
During patient transportation, height adjustment can affect operational efficiency. Our compact hydraulic power pack can be easily integrated into medical transport stretchers, optimizing internal layout while meeting the lifting adjustment needs.
Patients often need to adjust their position during the nursing process. Our medical hydraulic power pack provides power for bed lifting, backboard and leg board adjustment, helping medical staff to easily adjust patient positions.
During oral treatment, dentists often need to adjust chair position from different perspectives. The hydraulic power unit provides power for precise seat lifting and backrest adjustment, making the treatment process smoother.
Common Parameters of Hydraulic Power Pack for Medical Equipment
The table below lists some common parameters of the hydraulic power units for medical equipment. Most of the configurations can be customized by us.
| Item | Specification |
| Power Supply | 12V DC / 24V DC / 110V AC / 220V AC |
| Motor Power | 0.2 – 2.2 kW |
| Pump Type | External Gear Pump |
| Hydraulic Circuit | Single Acting / Double Acting |
| Working Pressure | 30–160 bar |
| Duty Cycle | Intermittent / Continuous |
| Flow Rate | 0.3 – 12 L/min |
| Reservoir Capacity | 0.5 – 25 L |
| Reservoir Material | Aluminum / Steel |
| Valve Configuration | Integrated Cartridge Manifold / Custom Circuit |
| Mounting Orientation | Horizontal / Vertical |
| Hydraulic Oil | ISO VG 32 / ISO VG 46 |
| Port Connection | BSPP / SAE ORB |
| Operating Frequency | 50 Hz / 60 Hz (AC Models) |
| Protection Rating | IP54 / IP65 (Optional) |
| Operating Temperature | -20°C to +60°C |
| Control Method | Wired Pendant / Foot Switch / Remote Control (Optional) |
We will provide product specifications, external drawings, hydraulic schematics, inspection records, material information, and usage instructions. If your medical equipment involves regulatory requirements, we can also supply RoHS and REACH compliance documentation, as well as test data for electrical safety or EMC-related components applicable to your project.
We reduce noise at the source rather than relying only on external sound insulation. Our medical equipment hydraulic power pack can be equipped with low-noise gear pumps, vibration-isolating motor mounts, flexible couplings, and optimized hydraulic circuits to minimize pressure pulsations and structural vibrations. In areas where lower noise levels are required, we can also optimize hose routing and mounting layouts to help you achieve quieter operation without affecting hydraulic performance.
For the medical HPU, the selection of seals should be determined comprehensively based on the disinfectants used, cleaning frequency, and the type of hydraulic oil.
FKM seals are suitable for working conditions where they come into contact with hydraulic oil and alcohol-based disinfectants. EPDM is more suitable for environments with hot water, steam sterilization, and water-based cleaning agents. If your equipment is in prolonged contact with highly corrosive chemical media, you can choose FFKM with better chemical resistance, but the cost is relatively higher.
We recommend that you provide us with actual cleaning and disinfection plans at the beginning of the project. This will help you select more suitable sealing materials and improve the long-term reliability of the hydraulic system.
Yes. If you already have cylinders, valves, or other hydraulic components, we can configure the hydraulic power pack for medical equipment to match their operating requirements. By configuring pressure, flow rate, interface size, etc., it helps to reduce compatibility issues during the integration process and improve assembly and debugging efficiency.